Blog

As rubber products, V-belts are prone to aging during daily use. It's a persistent concern for equipment operators. Today, let’s explore the external factors which may affect the actual service life of V-belts.   1. Oxidation Oxidation is one of the important reasons of rubber V-belt aging. Oxygen undergoes free radical chain reactions with rubber molecules, causing molecular chains to break or become excessively cross-linked, which leads to changes in the rubber's properties. 2. High-temperature environment A relatively high working temperature is an important factor that causes thermal decomposition or thermal cross-linking of rubber.   3. Mechanical stress V-belts are used on machinery, and repeated mechanical stress can cause rubber molecular chains to break, triggerin...

1. Identification of V-Belt Internal Structure Based on cross section, transmission V-belts are mainly classified into wrapped V-belts and cogged V-belts. 1. Wrapped V-Belts are covered with a special fabric, featuring a smooth surface without cogged profiles. Key Features: Good wear resistance, heat resistance and impact resistance, low running noise, high overall rigidity and stable power transmission. Application: Positions prone to clogging and slipping. 2. Cogged V-Belt (Cut-edge V-Belt) are available in single-sided inner cog and double-sided cog types. Key Features: Excellent flex resistance, good heat dissipation and high power transmission capacity. Application: Locations with high ambient temperature, high transmitted power and compact installation space, such as varia...

1. Robust belt quality    Belts are critical wearing parts for combine harvesters and industrial equipment. With Ruiniu’s proprietary rubber formula, our Wrapped V-belts feature high aramid cord tensile strength, low elongation, excellent wear resistance and heat resistance. They reliably adapt to the rising horsepower and heavier working loads of modern harvesters. Our full product range covers wheel-type combine harvesters, crawler combine harvesters and imported harvesters as well as industrial equipment including oil field equipment.  2. Deep partnership with leading OEM clients Ruiniu serves as an reliable supplier for top international harvester manufacturers including CLAAS, KUBOTA, CNH, and core supplier for top chinese harvester maufacturers in...

  Possessing a CNAS (China National Accreditation Service for Conformity Assessment) accredited lab inside a rubber V-belt manufacturers means this manufacturer possesses an in-house quality control center that is formally recognized to international standards (ISO/IEC 17025). It is very important symbol of technical strength and quality control capability for V-belt manufacturers.   1.The testing system complies with international standards. Laboratory personnel, instruments, metrological calibration, test methods, sample management and original records have passed CNAS on-site assessment. Key performance tests of V-belts, such as tensile strength, fatigue life, heat aging, elongation, dimensional tolerance, abrasion resistance and flex endurance, can be implemented in-house wi...

Why does the V-belt break? Customer may have this question when changing the v-belt of harvester machine. Let us help you answer:1. Insufficient tape strength due to insufficient internal cords. Different specifications and models of V-belts have corresponding standards for the number of wires. Insufficient number of wires will result in the V-belt strength not meeting the standards.2. The instantaneous load impact is too large.3. Excessive load and continuous high temperature.4. Abnormal damage such as scratches and cuts on the V-belt caused by foreign objects or external forces may cause the V-belt's stress stability to be damaged, leading to brittle fracture.   To solve this question, we advise you:1. Purchase products from reputable manufacturers to ensure quality and after-sal...

Wrapped V-belt vs. Cogged V-belt – How to Choose? When used in combine harvesters, the choice between a wrapped V-belt and a cogged V-belt depends on the operating conditions and performance requirements of the drive systems.   Wrapped V-belts are well-suited for heavy-duty and harsh field operations. Their fabric-wrapped construction provides excellent impact resistance, wear resistance, and anti-slip properties. This makes them ideal for handling sudden load changes caused by varying crop density, frequent starts and stops, and dusty environments. They are typically recommended for drives where stability and durability are the top priorities.   Cogged V-belts are designed to deliver higher power transmission efficiency and better heat dissipation—essential for combi...

Let China's largest agricultural V-belt manufacturer tell you: just use your tape measure to measure the inside length，outside length and width of the V-belt, and then tell the salesperson the data.   Attention:1. Make sure the tape measure used is easy to make a circle.2. The tape measure should be placed close to the inner and outer surfaces of the V-belt.3. Be sure to align the tape measure at the zero mark.   In this way, our salesperson and technical staff could quickly determine the V-belt model and select the most suitable one for you.           

Today, we will discuss several common problems associated with banded V-belts, along with practical solutions. Common Issues: Delamination between the joined belt segments and individual belts Banded belt splitting into separate strips Fabric separation from the belt body   Recommended Solutions: To prevent delamination, use pulleys specifically designed for banded V-belts and ensure precise alignment of the driving and driven pulleys in the same plane during installation. To mitigate fabric separation, consider using belts constructed with chloroprene rubber, which offers enhanced adhesion and durability. It is advisable to select the appropriate belt type for your application. Avoid changing pulley sizes arbitrarily—especially when switching from larger to s...

Why is the V-belt severely worn in the early stage of use?“The newly bought V-belt was worn out within two hours of being installed on the machine!”Some customers may said. Now we have sort out some reasons which may cause this phenomenon:1. The pulley is not smooth enough.2. The pulley angle is incorrect.3. Sudden acceleration (high-speed start) causes the V-belt to slip and wear severely.4. The tension of the tensioner is too low, causing the V-belt to slip.       How could we solve this question?There are some small details which need to attention before installing the belt:1. Check the pulleys carefully to ensure they are smooth and free of foreign matter.2. Purchase qualified products to avoid uneven angles during pulley processing.3. Accelerate and start pr...

Usually there are four reasons which may cause the scorching and cracking of the triangle belt:1. The load is too heavy, and the belt's bearing capacity is insufficient. 2. The initial tension is insufficient, causing the V-belt to slip. 3. The V-belt is not tightened in time during use, causing it to slip. 4. The machine is blocked and the pulley is stuck, causing the driven pulley to stop rotating and the V-belt to slip and burn.  How could we avoid this phenomenon?1. Choose high-quality products.2. Apply appropriate tension and check frequently in use, tighten it in time.3. Adjust the harvesting speed appropriately according to different terrain conditions to avoid blockage. If blockage occurs, stop the machine in time and deal with it before harvesting, which can effectively exte...

Chloroprene rubber wrapped v-belts are widely recognized for their durability, flexibility, and reliable power transmission performance. Designed with a fabric-covered surface that protects the internal structure, these belts are ideal for heavy-duty applications and harsh environments. But which industries benefit the most from using Ruiniu's wrapped v-belts? Let’s explore the key sectors where they play an essential role.   Agricultural Industry In agriculture, machinery often operates in dusty, dirty, and outdoor conditions. Wrapped V-Belts provide excellent resistance to abrasion and environmental wear, making them ideal for tractors, harvesters, and tillers. Their strong grip and stable performance under fluctuating loads help ensure continuous operation during critical sea...